Installing Windows XP from a USB pen

http://www.oxhow.com/windows-xp-bootable-usb-drive/

http://www.oxhow.com/create-multiboot-usb-drive-install-windows-7-xp-from-same-usb-drive/

Installing Windows XP from a USB pen

January 16, 2009 · Print This Article

This tutorial is designed to help those in need of installing Microsoft Windows XP on any PC that is capable of booting from a UFD (USB Flash Device)

Before you start you will need at your disposal:

1. Download & Run WinSetupFrom USB-0.1.1.

2. Complete the setup. The program will start automatically once you have finished.

3. Plug your pen drive into the computer and backup anything important from it as we are going to format it.

4. In the WinSetupFromUSB-0.1.1 window: click Refresh next the USB selection box. The USB pen you have just plugged in should now be visible in the drop down menu. Select it.

5. Insert your XP CD or mount an XP CD Image.

6. In the WinSetupFromUSB-0.1.1 window: click Browse, next to the Windows 2000/XP/2003 Source box, and navigate to the location of the XP Install CD.

7. Now click the PE2USB button.

8. Now Tick the Enable Disk Format box under Format Options and Tick Quick Format and Enable LBA (FAT16X). Also make sure that Enable File Copy is not ticked.

9. Click Start. Click Yes when the pop up asks if you wish to continue. Click Yes again when the pop up asks you if you are sure you wish to continue. When you get the Completed successfully message click OK and close PEtoUSB.

10. In the WinSetupFromUSB-0.1.1 window: Click GO. The Program will now create a bootable windows XP install on your USB pen drive.

11. Click agree to the “SYSINTERNALS SOFTWARE LICENSE TERMS” pop up.

12. Click OK to the “This is Important” pop up.

13. The creation process is now complete: Take the newly formatted USB Pen and place it in the USB port of the target computer and turn it on.

NOTE: You must now read carefully what pops up on the screen as it will provide you with the hot-key (keyboard shortcut key) that, when pressed, triggers access to the BIOS. It is usually something like F1, F2, Delete or Escape.

14. Navigate the BIOS with the keyboard and find the section that contains your boot devices. With your USB drive plugged in, the USB drive should be listed. If it isn’t, your system might not support booting from USB.

15. Assuming that it is supported (as is the case with virtually all modern hardware), promote your USB drive to the primary boot device.

16. Exit from the BIOS configuration, saving all changes.

17. The computer will now reboot. Assuming that you have successfully compiled the bootable USB XP install and that you have successfully selected the USB device to be booted first in the bios a screen should appear which reads Windows 2000/XP/2003 Setup – First and Second Parts . Press Enter. You will now be presented with 2 options. Select Option 1 (first part) for the first stage of the installation process.

18. When the first stage setup completes and system reboots select Windows 2000/XP/2003 Setup – First and Second Parts, then Option 2 (second part) for the second stage of the setup.

DO NOT REMOVE THE USB PEN FROM USB PORT UNTIL YOU SEE THE WINDOWS START MENU

References:

How to install from USB- WinSetupFromUSB with GUI, Lets try to make it easy for everyone…

http://www.msfn.org/board/index.php?showtopic=120444

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: